Showing all 11 results
This Pilot Jet Kit is for our 20mm Carb (Not Keihin PC20) and includes the following sizes (stock size is a 35): 30 32 38 NOTE: IF YOU DO NOT HAVE ONE OF OUR 20MM CARBS – DO NOT BUY THESE AS THERE ARE NO RETURNS EXCHANGES ON JETS AND THEY ONLY WORK ON THE…
Kit includes the carb, intake for STOCK HEAD, heatstop, gaskets, mounting bolts wrench, air filter and throttle cable (11 4 Update – a new type cable is provided that allows for more adjustments and will work on wider selection of throttles). We highly recommend this carb kit for use with bore kits (70cc to 88cc)….
Kit includes the carb, intake for RACE or PORTED HEAD, heatstop, gaskets, mounting bolts wrench, air filter and throttle cable (11 4 Update – a new type cable is provided that allows for more adjustments and will work on wider selection of throttles). We highly recommend this carb kit for use with bore kits (70cc…
Very nice aftermarket polished aluminum rim set (8×3.50 ). Includes one left and right side rim and hardware to fasten rims to each other. For street or trail use – not motocross
AFT Aluminum Rim Set – All Models (8×2.75″) Very nice aftermarket polished aluminum rim set (8×2.75″ – stock size). Includes one left and right side rim and hardware to fasten rims to each other. For street or trail use, not motocross.
Less than half the price of the Honda coil and works great! Just requires the ground wire be attached to one of the mounting bolts
Rear Shocks (one pair). Fits K3-87 models – need to use the top shock bushings from your stock shock – an easy swap. These shocks are taller than stock (11 280mm eye to eye) and stiffer providing a better ride for adults. They work on the stock swingarm or the 1.5
Performance exhaust with carbon fiber can for all Z50 models from 1972 and up (Same as our Performance Exhaust 2 except for the can) . Its a very high quality exhaust and also comes with an optional silencer cone. This is a must have item when putting on one of our 88cc thru 117cc bore…
This camshaft is for the Race Head only (Not for stock head) – Similar to TBW0189 but more aggressive lift and duration without sacrificing low end torque. Uses NTN bearings. Specs: .275″ intake valve lift and 230 degrees of duration @ .050″, 275″ exhaust valve lift and 230 degrees of duration @ .050″. Size: 42mm…
TB Swingarm, Plus 1.5″ – Z50 K3-78 & Z50R 79-99 New in 2020: TBparts.com has an updated version of our popular Plus 1.5″ extended aluminum swingarm kit for the Z50 K3-78 and all Z50R models. The previous version was a great performing swingarm that we sold for the last 10 years. We decided it was time…
88cc Big Bore Performance Kit (52mm) for your Honda Z50!
End of content
End of content
No products in the cart.
